= Vagrant Tips and Tricks = [[V2Master]] | [[V2Deployment]] <> = How to start a Vagrant VM with GUI = Sometime it may be necessary to start a VM with a GUI, e.g. to analyze a strange booting problem. However our servers have no GUI installed. Login to our host server as vagrant with X server redirection. It is recommended, that you copy your ssh key first to vagrant's authorized keys file. The example shows the situation with the MGT system on LU2. {{{ $ ssh -X vagrant@lu2.softxs.ch $ cd vms/mgt $ vi Vagrantfile # add "v.gui = true" in section "config.vm.provider :virtualbox do |v|" $ vagrant reload }}} After manual repairing done, remove "v.gui = true" again and restart the VM. = How to Repair Root Filesystem = If we see in the console (s. GUI above) the following error message, than it is not possible to start the VM: {{{ An error occurred while mounting /. keys: Press S to skip mounting or M for manual recovery. }}} In that case stop the VM by ''"vagrant halt"'', find the appropriate VMDK file, e.g. ''/home/vagrant/VirtualBox VMs/geopy/box-disk1.vmdk'' and attach it to an existing VM with a similar command to the following (assumed that "geopy" is to be repaired and ''vmt3'' is used to attach to): {{{ $ VBoxManage storageattach eb0db1e2-688d-4477-b585-f8108a8b1cd6 --storagectl 'SATA Controller' --port 3 --device 0 --type hdd --medium ~/VirtualBox\ VMs/geopy/box-disk1.vmd }}} The id of the VM can be found under ''/home/vagrant/vms/vmt3/.vagrant/machines/default/virtualbox/id''. The name of the storage controller and free port number can be fid out with ''"VBoxManage showvminfo eb0db1e2-688d-4477-b585-f8108a8b1cd6"''.<
> After the storage attached to the existing VM, start it up and perform e.g. ''"fsck /dev/sdb1"''. If it is ready, shutdown the VM, detach the VMDK file and start the repaired VM: {{{ $ cd vms/vmt3 $ vagrant halt $ VBoxManage storageattach eb0db1e2-688d-4477-b585-f8108a8b1cd6 --storagectl 'SATA Controller' --port 3 --device 0 --type hdd --medium none $ cd ../geopy $ vagrant up }}}