Drawing Code Handling

1. Drawing codes are composed of components, each of which (generally) has a meaning.
2. The drawing code components can be mapped to classification (and other fields) in the Drawings record.
   • Maps may be direct (to reference tables) or indirect, e.g. via drawing code map tables (see below).

3. There is a complex syntax described in SomePage (?)

   • Drawing codes structures are defined in app/config/Settings-DrawingCode.php

   • Drawing code functionality is implemented in app/lib/DrawingCodeBase.php

Drawing Code Definition

The drawing code definition is defined in:

1. The database table DrawingCodeTypeRef, where an id, code and name for each drawing code type is defined.

2. The configuration file app/config/Settings-DrawingCode.php, which defines all the components of each drawing code.

Drawing Code Component Definition

The drawing codes are defined in the $_CFG settings array.

Each Drawing Code has two parts:

1. DrawingCode - defines each drawing code component and separator

2. RevisionCode - defines:

   • each revision code component
   • revision numbering rules (starting revision number, are gaps allowed)
   • file storage rules for the publish and source files (how the files are named internally)

Top-Level Configuration

   $_CFG[ 'DrawingCodeDefinitions' ] = array(

     DrawingCodeTypeRef_DC1 => array( // KEJV: 14-C-9.99.999
       'name' => 'KEJV',

       'drawingCode' => array( // KEJV Drawing code definition
         'components' => array( ... )
       ),

       'revisionCode' => array( // KEJV Revision code definition 
         'components' => array( ... )
         ...
       ),
     ),

     DrawingCodeTypeRef_DC2 => array( // ...
       ...
     ),
   ),

Component Definition

Components are defined as a series of arrays (starting with component zero):

The following example shows a simple document code with three components:

• Drawing Code
  X	-	9999

Components

• Component	Name	Description
  X	Category	Engineering discipline, a single character taken from the field CategoryRef.code
  -	Separator	Constant text
  9999	Sequence	Four-digit sequence number

This is the definition in app/config/Settings-DrawingCode.php

       'drawingCode' => array( // Example drawing code definition
         'components' => array(
           array( // Category
             'name'               => 'Category',
             'type'               => 'select',
             'length'             => 1,
             'rmTable'            => 'CategoryRef',
             'rmCode'             => 'code',
             'rmName'             => 'CODE_NAME',
             'rmField'            => 'categoryId',
             'parse'              => '/^[A-Z]{0,1}$/',
             'pattern'            => '/^[A-Z]{1,1}$/',
             'fieldOut'           => 'categoryId',
           ),
           array( // Separator
             'type'               => 'constant',
             'value'              => '-',
             'parse'              => '-',
           ),
           array( // Sequence number
             'name'               => 'Sequence Number',
             'type'               => 'manual',
             'length'             => 4,
             'formatCode'         => '%04d',
             'fieldOut'           => 'drawingNo',
             'formatOut'          => '%d',
             'parse'              => '/^\d{0,4}$/',
             'pattern'            => '/^\d{1,4}$/',
           ),
         ),
       ),

Notes about the components:

1. The category is a select field of a single character, and maps directly to Drawings.categoryId.
2. The separator is constant text.
3. The sequence number is a manual entry value, which must be numeric. It maps directly to Drawings.drawingNo.

There are many component keywords. The complete list of valid keywords is defined below.

Component Keywords

Component Types

Revision Keywords

Filename Name Handling

Counters

to be completed

Drawing Code Maps

Drawing code maps allow classification (and other) fields to be directly set based on drawing code components. This is main mechanism for automatically setting classification fields based on a drawing code.

There are two kinds of maps:

1. Direct maps - map a drawing code component value directly to the code of the target field

2. Indirect maps - which use DrawingCodeMap tables to map from a drawing code component

   • value to one (or more) target field/values pairs.

Examples

Mapping from Drawing Code Components to Classifications

1. Uses the following tables:

   • DrawingCodeMapRef - Defines a drawing code component map (basically its name and id)

   • DrawingCodeMapCodes - Defines the code values allowed for the drawing code component

   • DrawingCodeMapValues - Defines mapping from the drawing code component values to classification id values

Examples

Example component ''languageCode'' for the MET Drawing Code (Indirect Mapping)

1. In DrawingCodeMapRef:

   • id=1002, name='Language Code'

2. In DrawingCodeMapCodes:

   • EN - English
   • EH - English/Hungarian
   • HU - Hungarian

3. In DrawingCodeMapValues, if these codes mapped to a classification (which currently they do not), we

   • can put (nultiple) mappings of target (field, value) tuples. Note that the field refers to the form (? check this)

   • HU --> Drawings.languageId, 3 (3=Hungarian)

Note that this is not yet implemented for V12.x, e.g. for aspect based classifications.

Example: Mapping Projektphase (c) to ProjectPhaseRef in Axpo/NOK DrawingCode (Direct Mapping)

• In app/config/Settings-DrawingCode.php

• array( // b (Projektphase) --> projectPhaseId
     'name'               => 'Projektphase',
     'type'               => 'select',
     'length'             => 1,
     'rmTable'            => 'ProjectPhaseRef',
     'rmCode'             => 'code',
     'rmName'             => 'CODE_NAME',
     'rmField'            => 'projectPhaseId',
     'formatCode'         => '%d',
     'fieldOut'           => 'projectPhaseId',
     'parse'              => '/^[0-9]{0,1}$/',
     'pattern'            => '/^[0-9]{1,1}$/',
   ),

Example: Mapping a Subset of Fachbereich (cc) to CategoryRef in Axpo/NOK DrawingCode

The problem is to map a subset of the Fachbereich (CategoryRef table) from a drawing code component to the Fachbereich